SEI FA966800TX, Руководство по сборке

Страница: 6 / 8

ASSEMBLY INSTRUCTIONS
Attach the front frame assembled in
step 1 to the small central pilasters
from the back with the flat head screw
(D) as shown.Tighten them with phillips
head scrwedriver (not included).
Hardware Used
Insert cam lock (C) into corresponding
holes on big pilasters(4L&4R) and side
panels(3L&3R).Make sure the arrow
points towards the hole of the edge.
Screw cam bolt (B) and insert wood
dowel (A) into corresponding holes
on top panel (1).
Attach the top panel to the assembled
unit in step 4 and then tighten them
with phillipshead screwdriver by
turning the cam lock clockwise until
engaged with the cam bolt as shown.
Place the shelf frame (8) into the
bottom panel as the figure shown.
Hardware Used
6
Insert one wood dowel (A) into the hole
on the bottom panel as shown.
Flat Head Screw X10
Wood Dowel X1
Wood Dowel X5
Cam Bolt X6
Cam Lock X6
4
5