SEI FA966800TX, Руководство по сборке

Страница: 5 / 8

ASSEMBLY INSTRUCTIONS
Insert cam lock (C) into corresponding
holes on side panels (3L&3R) .
Make sure the arrow points towards
the hole of the edge.
Screw cam bolt (B) and insert wood
dowel (A) into corresponding holes
on big outside pilasters (4L&4R).
Attach the pilasters to the side panels
correspondingly and tighten them with
phillips head screwdriver (not included)
by turning the cam lock clockwise until
engaged with the cam bolt as shown.
Hardware Used
Cam Bolt X6
Insert cam lock (C) into corresponding
holes on big pilasters(4L&4R) and side
panels(3L&3R) .Make sure the arrow
points towards the hole of the edge.
Screw cam bolt (B) and insert wood
dowel (A) into corresponding holes
on bottom panel (2).
Attach the assembled side panels to the
bottom panel correspondingly and then
tighten them with phillips head
screwdriver (not included) by turning the
cam lock clockwise until engaged with
the cam bolt as the figure shown.
Hardware Used
Wood Dowel X4
Cam Bolt X6
Cam Lock X6
5
Wood Dowel X6
Cam Lock X6
2
3