SEI Industries 007898, Руководство по эксплуатации

Страница: 12 / 29

Section 3: Deploying the Bucket
Bambi MAX Bucket Operations Manual 7
To confirm the bucket overall length, stretch out the bucket on the ground, pulling the
suspension cables taut. Measure the distance from the shackle on the head to the bottom of the
shell.
3. The tail rotor clearance is equal to the tail rotor length minus the bucket overall length.
4. The tail rotor clearance must be a minimum of 6” (0.15 m).
If the tail rotor clearance is insufficient, shorter suspension lines and deployment lines must be used and
can be ordered from SEI. Please specify the model and serial number when ordering parts.
Instant Deployment System (IDS)
The instant deployment system uses a hub and spoke
mechanism to automatically expand the mouth of the bucket as
soon as the weight of the Bambi MAX Bucket is taken up by
the suspension cables.
When the bucket is full, the IDS deployment cable and hub
restrainer cables should be slack as they should not bear any
load. Their function is to position the hub and spoke
mechanism to hold the bucket open.
To deploy the IDS on the ground, reach into the bucket, grasp
the hub of the IDS and pull outward fully until the two
restraining cables from the hub to the lower bucket shell are
tight.
The IDS restraining cables are set at the factory and normally
should not require any adjustment.