SEI Industries 007898, Руководство по эксплуатации

Страница: 10 / 29

Section 3: Deploying the Bucket
Bambi MAX Bucket Operations Manual 5
Section 3: Deploying the Bucket
Attaching to the Cargo Hook
Correct attachment of the head is indicated when the ballast on the bucket faces forward in fligh
t
which
will avoid twisting of the suspension lines. If using a swivel hook, it is recommended to operate in the
locked position to assure that the ballast is always facing forward in flight.
The Bambi MAX Bucket is rigged for a longitudinal
cargo hook. The top shackle on the head acts as the
secondary ring for the cargo hook. The operator must
supply a primary ring in accordance with the cargo
hook manufacturer’s recommendations.
If the helicopter has a lateral cargo hook, an additional
ring or shackle will be required between the top shackle
and the primary ring to rotate the bucket 90°.
WARNING
Ensure that all rings and shackles are rated with a minimum safety factor of five for the gross weight of
the bucket as shown on the data plate.
Connecting Power
The Bambi MAX Bucket’s electrical supply is connected through a breakaway plug. The purpose of the
plug is to offer a clean “breakaway” if the Bambi MAX has to be jettisoned from the aircraft in an
emergency. If the control cable is not secured to the longline, duct tape should be wrapped every 24-36"
to prevent any damage to the cable.
CAUTION
The Bambi MAX Bucket may not be suitable for a direct hook-up to the cargo hook. The actual hook-
up will be different for various aircraft and operators must comply with all instructions and bulletins
supplied by the aircraft manufacturer. It is the operator’s responsibility to ensure that the Bambi MAX
Bucket is correctly fitted to the helicopter.