SEH primos, Руководство пользователя

Страница: 21 / 78

primos User Manual Network Settings
17
4. Click Save to confirm.

The setting will be saved.
3.5 How to Configure Directory Services
You can embed primos into a directory service. Via the directory service user data is
managed centrally and can be provided to primos. You can use directory service users
• to control who can print

35
• for user logins into the primos Control Center

46
primos supports the following directory service:
• Active Directory
• LDAP (e.g. OpenLDAP or Apple® Open Directory)
What Do You
Want to Do?

’Embedding primos into an Active Directory’

17

’Embedding primos into an LDAP directory’

18
Embedding primos into an Active Directory
primos is embedded into an Active Directory by making it member of a domain.
Requirements

A DNS server is configured in primos

16.

primos was entered with a type A resource record (IPv4 address of the host) on the
DNS server used.

A time server is configured in primos

20.
1. Start the primos Control Center.
2. Select
NETWORK – Directory services .
3. Configure the Active Directory parameters; table 4

17.
4. Click Save to confirm.

primos is member of a domain and thus embedded into the Active Directory.
Table 4: Active Directory parameters
Parameters Description
Active Directory Enables/disables the embedding of primos into an existing Active
Directory.
Active Directory name Defines the name of the Active Directory into which primos is embedded.
Enter the full name of the domain (Fully Qualified Domain Name – FQDN).
Workgroup Defines the name of the workgroup.
Enter the NetBIOS domain name.