SEH primos, Руководство пользователя

Страница: 22 / 78

primos User Manual Network Settings
18
Embedding primos into an LDAP directory
Requirements

A DNS server is configured in primos

16.

primos was entered with a type A resource record (IPv4 address of the host) on the
DNS server used.

A time server is configured in primos

20.
1. Start the primos Control Center.
2. Select
NETWORK – Directory services .
3. Configure the LDAP parameters; table 5

18.
4. Click Save to confirm.

primos is embedded into the LDAP directory.
Table 5: LDAP parameters
Password server Defines the password server of the Active Directory via the IP address or
the host name. (Optional)
The host name can only be used if a DNS server was configured beforehand.
WINS server Defines the WINS server of the Active Directory via the IP address or the
host name.
A WINS server should be specified to allow the communication between
participants of different network segments.
The host name can only be used if a DNS server was configured beforehand.
Administrator account Defines the name of the administrator account that was created for primos
on the Domain Controller.
Password Password of the administrator account that was created for primos on the
Domain Controller of the Active Directory.
Parameters Description
Parameters Description
LDAP Enables/disables the embedding of primos into an existing LDAP directory
service.
LDAP server Defines the LDAP server via the IP address or the host name.
The host name can only be used if a DNS server was configured beforehand.
Base DN Defines the base DN (distinguished name). The base DN defines the
starting point in the directory for the downwards search of users.
Domain components are to be separated by commas (example:
dc=mydomain,dc=com).
Secure LDAP Encrypts the LDAP connection (LDAP over SSL/TLS – LDAPS).
A CA certificate is required for the encryption.