Information
Print Server Installation Manual
9
1.4
... about the Configuration of Apple Parameters
on the Print Server
To use the Apple services, you can configure a couple of Apple
parameters such as the Apple name, zone, and the printer type.
Proceed as follows:
1. Start the Print Server Homepage or start the InterCon-NetTool
and double-click the print server in the print server list.
2. Select
Configuration – Apple
.
3. Configure the Apple parameters; see: Table 2
Ö
9.
4. Click
Save
or
OK
to confirm.
ª
The settings are saved.
Table 2: Apple Parameters
Parameters
Description
AppleTalk
Enables/disables AppleTalk
Apple name
Apple name, printer name or print server name
(Upon delivery, the default name is displayed.)
Zone
Name of the Apple Zone
PostScript Encoding
Defines the protocol for printing in the binary mode
of external print server models.
Printer type
(LPT1,LPT2,...)
(USB1,USB2,...)
Defines the Apple Printer type.
You can enter a maximum of 32 characters.
(As for print servers with several physical printer
ports, each port can have a printer type).
Bonjour
Enables/disables Bonjour
Bonjour name
(LPT1,LPT2,...)
(USB1,USB2,...)
Defines the Bonjour name of the print server.
The print server uses this name for its Bonjour
services. If no Bonjour name is entered, the default
name will be used (printer name@ICxxxxxx).
You can enter a maximum of 63 characters. The
name must not start with an underscore.
(As for print servers with several physical printer
ports, each port can have a name).
