Segway SNARLER AT6 L, Руководство пользователя

Страница: 131 / 196

MAINTENANCE, STORAGE AND TRANSPORTATION
123
COOLANT
The coolant circulates in the engine cooling system, taking away
the excess heat generated during the engine operation and
making the engine operate at normal operating temperature.
Maintaining the coolant will allow the cooling system to work
properly and prevent freezing, overheating, and corrosion.
Therefore, the coolant should be frequently checked. If found
that the coolant is insufficient, it should be added in time
.
The
factory provides a 50/50 solution of antifreeze and water in this
ATV. This coolant solution is recommended for most operating
temperatures and provides good corrosion protection.
Adding Coolant
The recovery bottle is located on the left side of the vehicle.
1. Observe the liquid level in the bottle
2. If the liquid level is low, remove the cap and add coolant.
Maintain the coolant level between the minimum
2
and
maximum
1
marks on the bottle (when the liquid is cool).
3. Remove the front panel maintenance cover in the middle area
of the front upper part of the vehicle (see page 109);
4. Unscrew the lid and pour in new coolant. Pay attention to the
position of the coolant when pouring in. and do not exceed the
maximum liquid level.
5. Tighten the lid of the cooling bottle
6. Reinstall the instrument cover and confirm whether the
instrument cover is installed