
Wheel Insert Replacement Instructions
©2005 Segway LLC
Page 3 of 3
18987-00001aa
Install the Splash Guard
Step 4
Position the Splash Guard into the
position you select on the Fender.
(For best spray protection, install the
Splash Guard in the rear position.)
Step 5
Hold the two Fender Tabs in the slots
in the Fender, and thread the two
fasteners through the Fender Tabs
and Fender and into the Splash
Guard.
Step 6
Torque to 1.5 N-m using a T-20 six-
lobed bit (Torx T-20). Over tightening
could strip aluminum threads.
Reseat the Tire/Wheel Assembly
Step 1
Place the Wheel hub opening over
the Gearbox drive shaft; rotate the
wheel while pressing down until the
wheel seats.
Step 2
Thread on the wheel nut and tighten
with the socket wrench.
Step 3
Torque to 50.0 N-m.
We hope this document provided clear step-by-step instructions. If you feel these instructions
are incorrect in any way, we would like to hear from you. Please contact Segway Customer
Support at 1-866-4SEGWAY (1-866-473-4929) or go to www.segway.com if you have any
questions, comments or suggestions. Thank you!