Sega The House of the Dead 4, Руководство пользователя

Страница: 33 / 202

− 28 −
WIRING COVER
① Ensure that the main switch is OFF.
FIG. 6. 5 b AC Unit
⑤ Firmly insert the power plug into the socket
outlet. Insert the opposite side of the power
cord plug to the AC Unit's connector
("INLET").
Perform wiring for the power cord and earth
wire. Install protective insulation for the
power cord and earth wire.
If you are using a separate earth to earth the
product make sure you install protective
insulation for this also.
④ If you are using a separate earth cable connect one end of
the earth to the earth terminal on the AC unit and the
other end to your in-store earth terminal.
The AC Unit earth terminal has a Bolt and Nut
combination. Take off the Nut, pass the earth wire
through the Bolt, and fasten the nut. <For Taiwan>
*Note that the earth wire is incorporated in the power
cord for the Areas of AC 120V (USA) and AC 220 〜
240V, and therefore, this procedure is not necessary.
FIG. 6. 5 c *Earth Wire Connection
FIG. 6. 5 d Connecting the Power Cord and Earth Wire
② Insert the connector on the non-power plug end of the power cord into the AC unit's inlet. Pass
the connector through the hole in the base of the satellite and insert it firmly into the AC unit's
inlet.
③ Insert the power plug firmly into a power socket.
INLET
CIRCUIT PROTECTOR
To the AC outlet
AC CABLE (POWER CORD)
MAIN SWITCH
Main SW off.
EARTH TERMINAL <TAIWAN>
Connect with the indoor earth terminal.
Connect the earth wire to the
earth terminal.