Sega The House of the Dead 4, Руководство пользователя

Страница: 101 / 202

− 96 −
① ADJUST (ADJUST Mode): Press this button to enter ADJUST Mode. It
also functions as the EXIT button.
② W/B switch (white balance):
Select WHITE BALANCE Mode.
③ WRITING (memory):
Store adjustment data.
④ R, G, B (color select):
Use to select a color when adjusting color
balance.
⑤ CONTRAST: Adjust the contrast of the projected image.
⑥ BRIGHT: Adjust the black level (brightness) of the
projected image.
⑦ TP (test pattern):
Display an internal test pattern.
⑧ PHASE (phase adjust):
Adjust the sampling phase.
⑨ CLOCK (clock adjust):
Adjust the sampling clock.
⑩ POSI (display position):
Adjust the display position of the projected
image.
⑪ CAPTURE (adjust image capture): Adjust timing of image capture.
⑫ VIDEO input: Select video input.
⑬ RGB input: Select RGB input.
⑭ DVI input: Select DVI input.
⑮
*1
SERVICE: Enter SERVICE Mode.
⑯ CUT OFF (adjust cut off): Adjust the white balance of dark areas.
⑰ ADJUST (adjust up/down and left/right): Adjusted selected category.
⑱
*1
SPECIAL: Enter SPECIAL Mode.
⑲ DRIVE (adjust drive): Adjust the white balance of light areas.
The projector is precisely adjusted in the factory prior to sale. Avoid
unnecessary adjustment at all costs. Needlessly altering adjustment data
may make any later repairs harder to perform.
Control and Adjustment