Sega The House Of The Dead 4 29"STD, Руководство пользователя

Страница: 20 / 68

ASSEMBLY CHECK 4
Use Test Mode to check that the product has been assembled correctly and that the game board, other connected boards and all output devices are working cor-
rectly. Perform this test in Test Mode as follows. See “9-2 System Test Mode” for tests (1) to (4) below and “9-3 Game Test Mode” for test (5) to (7).
(1) Information Display Screen
Selecting SYSTEM INFORMATION, STORAGE INFORMATION or JVS TEST from the SYSTEM TEST Mode menu screen will displayed system informa-
tion, game information and information concerning the JVS I/O board attached to the LINDBERGH board. If all information is displayed correctly then the
LINDBERGH board is running smoothly.
(2) JVS Input Test Screen
Selecting INPUT TEST on the JVS TEST Screen will display input data for the JVS I/O board. For this product this is the screen to test the coin switches. Insert
a coin to perform a test. If the display nest to the switch changes the switch and connections are working correctly.
(3) Monitor Test Screen
Selecting MONITOR TEST on the SYSTEM TEST Mode menu screen will display a screen that allows the monitor output to be tested. The projector comes
adjusted from the factory but still use this TEST Screen to make sure that further adjustment is not required. If required, see chapter 11 for information on
adjusting the projector.
(4) Speaker Test Screen
Selecting SPEAKER TEST from the SYSTEM TEST Mode menu screen will display a screen that allows the speaker output to be tested. The speakers attached
to the machine will output a test sound. Use this to check that all speakers are outputting correctly.
INPUT TEST
PLAYER1 PLAYER2
START OFF OFF
GUN TRIGGER OFF OFF
GUN BUTTON OFF OFF
GUN SPEED X 7f 7f
GUN SPEED Y 7f 7f
GUN X 00 00
GUN Y 00 00
SCREEN IN OUT OUT
SERVICE OFF
TEST OFF
PRESS TEST AND SERVICE TO EXIT
OUTPUT TEST
START1 LAMP OFF
START2 LAMP OFF
-> EXIT
SELECT WITH SERVICE AND PRESS TEST
(5) Input Test
Selecting INPUT TEST from the GAME TEST Mode menu screen will display a
screen that allows input devices to be tested. Press each switch to check that each
is working. If the display next to the input device changes to on “ON” or the values
displayed change smoothly then that input device and all connections
with it are working correctly.
(6) Output Test
Selecting OUTPUT TEST from the GAME TEST Mode menu screen will display
a screen that allows output devices to be tested. Operate the lamps and other output
devices and check that they are all working correctly.
GUN MARK CHECK
+ OUT OF SCREEN P1 + + OUT OF SCREEN P2 +
PRESS TEST TO EXIT
(7) Calibration Check and Speed Check
Prior to letting customers use the game you must play a game and make sure that
everything is operating correctly. Although adjusted prior to leaving the factory
incidents in transit may have affected these settings and so check to make sure that
adjustment is not required.
You should perform the above checks once a month. However (7) should be per-
formed at least once a week.
15