Sega SuperBooth, Инструкции по сборке и настройке

Страница: 4 / 38

Assembly Procedures
6. Align the middle wall [B] with the main pod [A]. Use the
included hex key to lock the wall together.
To lock [A] to [B]
Insert the hex key and turn it counterclockwise
[if you are on the inside of the booth] or clockwise [if you
are on the outside of the booth] to engage both locks.
7. Align the middle wall [B] with the back wall [C]. Use the
included hex key to lock the wall together.
To lock [B] to [C]
Insert the hex key and turn it counterclockwise
to engage both locks on the right hand side of the middle
wall while you are inside of the booth.
Inside the booth
[A] [B] [C] [C] [B] [A]
Back of the booth
Inside the booth
[A] [B] [C]
White Hole Plugs
After you tighten the
wall locks please insert
the four hole plugs.