Sega SuperBooth, Инструкции по сборке и настройке

Страница: 3 / 38

UnPacking Procedures
1. Use scissors or utility knife to cut* through the
strapping plastic.
*Do not cut too deep or you’ll damage unit.
2. Open the cardboard box.
3. Remove back and middle wall from the pallet.
4. Remove the main SuperBooth pod from the pallet with
a forklift or roll the pod off the pallet with a ramp.
5. Place SuperBooth pod [A] in desired location [total area
of fully assembled booth is 125” Wide x 60” Deep.
Main Pod
[Section A]
Back Wall
[Section C]
Topper
[Section D]
Middle Wall
[Section B]