Sega SEGA RALLY CHAMPIONSHIP TWIN TYPE, Руководство пользователя

Страница: 29 / 106

26
Select INPUT TEST to have the screen shown below appear and to observe the status of each switch and the
Control Panel’s each V.R. Value. Periodically check the status of each switch and V.R. on this screen.
7 -5 INPUT TEST
FIG. 7.5 INPUT TEST
By pressing each switch, if the display onthe right-hand side
of the name of each switch changes to ON from OFF, the SW
and the wiring connections are satisfactory.
To check CHUTE 1 & CHUTE 2 coin switches, open the
COIN CHUTE DOOR and insert a coin(s) in the slot.
Press either the TEST BUTTON or the START
VIEW CHANGE BUTTON to return to the test menu.
GEAR POSITION indicates which shift and SHIFT LEVER
is in. “N” means neutral.
INPUT TEST
STEERING WHEEL **H
GAS PEDAL **H
BRAKE PEDAL **H
SHIFT UP OFF
SHIFT DOWN OFF
VIEW 1 (ZOOM IN) OFF
VIEW 2 (ZOOM OUT) OFF
START OFF
HAND BRAKE OFF
GEAR POSITION N
COIN CHUTE #1 OFF
COIN CHUTE #2
SERVICE-SW OFF
TEST-SW OFF
PRESS TEST BUTTON TO EXIT
Choose OUTPUT TEST to cause the following lower screen
to appear. In this test, check the status of each lamp.
Pressing the TEST BUTTON causes “ON” to be
displayed and the corresponding lamp lights up.
Pressing the TEST BUTTON again cuases “OFF” to be
displayed and the lamp goes off.
Press the test Button to return to the MENU MODE.
FIG. 7.6 OUTPUT TEST
7 - 6 OUTPUT TEST
OUTPUT TEST
START LAMP OFF
VIEW 1 (ZOOM IN) OFF
VIEW 2 (ZOOM OUT) OFF
DECORATION LAMP OFF
>EXIT
PRESS TEST BUTTON TO EXIT
THE APPROPRIATE VALUES OF EACH V.R.