Sega Rally 2 DX, Руководство пользователя

Страница: 72 / 129

68
17 . GAME BOARD
In order to prevent an electrical shock, be sure to turn power off before
performing work by touching the interior parts of the product.
Be careful so as not to damage wirings. Damaged wiring can cause an
electric shock or short circuit accident.
Do not expose the Game BD, etc. without a good reason. In this product,
setting changes are made during the test mode. The Game BD need not be
operated. Use the Game BD, etc. as is with the same setting made at the
time of shipment.
17 -1 REMOVING THE GAME BOARD
To replace the IC Board or to change dip switch settings, take out the IC board using the following procedure;
1
2
3
Turn the Power off.
Remove the 2 screws and unlock to open
Side Door L.
Remove the connector from the Terminal by
loosening the 2 screws (one each on the left/
right side) which secure the connector.
Disconnect the Optic Fiber Connector.
Remove all of the connectors from inside the
cabinet.
4
5