Sega PRIMEVAL HUNT Скачать руководство пользователя страница 94

Страница: 94 / 137

LAMP REPLACEMENT

FLUORESCENT LAMP REPLACEMENT

• When working with the product, be sure to turn the power off. Working with the

power on may cause an electric shock or short circuit.

• There is danger that hot lamps can cause burns. Exercise due caution when

replacing lamps.

• Use lamps of the specified ratings. Using lamps with different ratings may cause

fires or damage.

• Such things as deteriorated insulation in lighting fixtures can cause a short circuit

and/or smoke. Make sure there are no abnormalities. For example, check if you can

smell anything burning, if any sockets have been discolored and if the lamp has to

be replaced frequently.

• Be careful when handling parts made of plastic or glass, for example be careful not

to tighten screws excessively. If such parts are damaged, injuries could be caused by

fragments, cracks, etc.
• To perform the operation safely and accurately you must use a safe, steady step or

footstool. Working without this may lead to a fall and possible injury.
• When performing the fluorescent lamp replacement, do not hold onto the Billboard

or side fitting POPs. Holding or hanging off these components may bend them out

of shape or damage them, and could lead to a fall or an accident.

PLEASE WEAR PROTECTIVE CLOTHING / EQUIPMENT WHEN CHANGING

FLUORESCENT LAMPS. PROTECTIVE GLOVES AND EYE WEAR ARE

RECOMMENDED

• Do not attempt to remove the fluorescent lamp whilst the machine is powered up.

Always disconnect the machine from the main power supply before changing the

lamp.

Содержание PRIMEVAL HUNT










































































































































Результаты поиска

Содержание PRIMEVAL HUNT

Отзывы:

Бренды по названию

Популярные бренды

Sega PRIMEVAL HUNT, Руководство пользователя

Результаты поиска

Содержание PRIMEVAL HUNT

Отзывы:

Бренды по названию

Популярные бренды