Sega PRIMEVAL HUNT, Руководство пользователя

Страница: 69 / 137

62
CONTROL
UNIT
10
If the gun does not operate satisfactorily and adjustments in Test Mode are ineffective, it could be that
parts inside the gun have been damaged.
Follow the steps listed below to dissemble the gun, for service and part replacement.
Internal parts are inserted on the R cover side, therefore always work with the R cover facing downward
as shown in 10-01 Fig 01.
1
Seven different types or sizes of screw are used to fasten the L and R Gun covers. Using a total of
22 screws, all of which have to be removed before the L and R covers can be detached.
2
First remove the Pump Handle when dissembling the Gun to reveal the fixing screws 'D'.
To remove the Pump Handle Housing,
take a T10 Star Key and remove fixing
'G', then using a T25 Star Key remove
the remaining two 'E' fixings. (Note
that the 'E' fixings have Nyloc Nuts
located in the reverse side of the
molding that will fall out when the
Bolts are removed).
Showing the positions of the 'D' Fixings.
10-1 Fg. 01
10-1 Fg. 02
10-1 Fg. 03
10-1 DIS-ASSEMBLING THE PUMP GUN