background image

  

Mushiking#2-eng.doc

 

最終印刷日時:

2010/01/14 14:18:00 

4/17 

(11) Game Over 
 

In single-player mode, players can clear the game if they defeat the four opponent beetles from levels 1 

to 4. On the other hand, if they are defeated by an opponent beetle during the course of play, this will result 
in “Game Over”. There is no option to “Continue”. (Screen 10) 
 
 

Screen 10 

 
 

In two-player mode, each player is granted entry of two beetles, and 

the winner is the player with the last remaining beetle. (Screen 11) 
 
 

Screen 11 

 
 
 
 
 

HOW TO USE MUSHIKING CARDS

 

 

There are two types of Mushiking Cards dispensed, “Beetle Cards” and “Skill 

Cards”. 
 

Using “Beetle Cards” allows use of the card’s beetle in battle. 

 

Using “Skill Cards” allows the beetle to learn the card’s technique and 

increase the beetle’s attack power. 
 

One of each type of “Skill Card”—Hit, Pinch, and Throw—can be used at the 

same time for a total of three cards. 
 

The amount of increased attack power granted to the beetle depends on the 

combination (compatibility) of “Beetle Cards” and “Skill Cards”. 
 

The greater the “Technique” value of a “Beetle Card”, the more likely it is for 

the beetle to perform techniques with a high degree of difficulty. (They are 
difficult, but they wield tremendous attack power.) 
 

1) Beetle Card 

2) Skill Card 

 
 
 
 

Содержание Mushiking






























































Отзывы: