Sega Mushiking Скачать руководство пользователя страница 14

Страница: 14 / 61

「

Mushiking#1-eng.doc

」

最終印刷日時：

2010/01/14 14:16:00

14/27

(P. 13)

6. ASSEMBLY AND INSTALLATION

[!] WARNING

●

Perform assembly work by following the procedure herein stated. Failure to

comply with the instructions can cause electric shock.

●

Perform assembling as per this manual. Since this is a complex machine,

incorrect assembling can cause an electric shock, machine damage and/or

improper functioning as per specified performance.

●

Ensure that connectors are accurately connected. Incomplete connections

can cause electric shock.

●

Be careful not to damage the wires. Damaged wires may cause electric

shock or short circuit or present a risk of fire.

●

This work should be performed by the site maintenance individual or other

skilled professional. Performing work by non-technical personnel can cause a

severe accident such as electric shock. Failing to comply with this instruction

can cause a severe accident such as electric shock to the player during

operation.

●

Provide sufficient space so that assembling can be performed. Performing

work in places with narrow space or low ceiling may cause an accident and

assembly work to be difficult.

●

To perform work safely and avoid serious accidents such as the cabinet falling

down, do not perform work in places where step-like grade differences, a ditch,

or slope exist.

[!] CAUTION

Handle molded parts with care. Excessive weight or pressure may cause them to

break and the broken pieces may cause injury.

When carrying out the assembling and installation, follow the following 6-item sequence.

[1] SECURING IN PLACE (ADJUSTER ADJUSTMENT)

[2] POWER SUPPLY AND EARTH CONNECTION

[3] ASSEMBLING THE POP

[4] INSERTING THE MANAGEMENT CHIP AND MUSHIKING CARDS (See Section 7)

[5] POWERING ON

[6] ASSEMBLY CHECK

Содержание Mushiking






























































Результаты поиска

Содержание Mushiking

Отзывы:

Похожие инструкции для Mushiking

Бренды по названию

Популярные бренды

Sega Mushiking, Руководство пользователя

Результаты поиска

Содержание Mushiking

Отзывы:

Похожие инструкции для Mushiking

Бренды по названию

Популярные бренды