Sega MARIO & SONIC AT THE RIO 2016 OLYMPIC GAMES, Руководство по эксплуатации для владельца

Страница: 52 / 171

PRECAUTIONS WHEN MOVING THE MACHINE
39
7
7 PRECAUTIONS WHEN MOVING THE MACHINE
• As used in these instructions, the term “moving” refers to moving of the product
within the same building, store or facility. These instructions do not cover
moving between different buildings, areas, stores or facilities, since diverse
factors are involved, not only packaging but also loading onto transport
vehicles, and securing the product in place during transport. To transport the
product to a different building or store, contact the vendor where the product
was purchased or the office indicated in these instructions. Or request that
moving be done for you. This product is made up of parts that are of large
size and heavy weight. Unless work is entrusted to someone with expertise in
packaging and transport of such parts, a serious accident might occur.
• Even when the product is to be moved within the same building, store
or facility, contact the point of purchase or the office indicated in these
instructions if there will be level differences or narrow or low level entrances
while moving. Or request that moving be done for you. Never disassemble the
product in any way not covered in these instructions. Otherwise there could be
a fire, electric shock and/or short circuit.
• Always disconnect the power cable before moving the product. If it is moved
with the power cable connected, the cable could be damaged, causing fire
or electric shock.
• A qualified electrician is required for moving product parts within a store and
for changing indoor wiring. Do not have work performed by anyone who is not
qualified. Otherwise there could be electric shock.
• Have work performed by site maintenance personnel or other qualified
individuals. Do not allow people without proper knowledge and technical
expertise to work on the product. Otherwise there could be an electric shock
or other serious accident. Also, customers could be injured while operating the
product.
• Do not try to move this product while it is still assembled. Always remove the
Billboard and split the cabinets before moving.
• Because it is structurally difficult for exterior lighting to enter the cabinet, have
auxiliary lighting available. Working within a dark environment can lead to
accidents.
• For instructions on separation and disassembly of the cabinet, refer to Chapter
6 & 7 of this manual. Failure to follow the instructions given by this manual
leaves a high risk of accidents such as electric shock occurring.
• Proceed with checks and tasks as indicated in these instructions. If instructions
are not followed, or if tasks and/or checks are neglected, an electric shock or
other very serious accident, even fatal accident, can occur. Also, customers
could be injured while operating the product.
• Be careful not to damage wiring. Before separating parts that have wiring
connections, disconnect the wiring connections, unravel wire bundles and
undo fastenings. Only after that, remove fasteners (screws, nuts, etc.). If wiring
becomes damaged, there could be an electric shock, short circuit or fire.