Sega MARIO & SONIC AT THE RIO 2016 OLYMPIC GAMES, Руководство по эксплуатации для владельца

Страница: 119 / 171

106
GAME BOARD
16
16-3 REPLACING Nu 1.1 GAME BD
1
Remove power from the machine and disconnect the power cable.
2
Refer to section 16-1 Nu 1.1 Removal to remove the Game bd.
3
Once the Nu 1.1 Game Board has been removed, unplug the key chip from the Nu 1.1.
4
Insert the Key Chip into the replacement Nu 1.1 Game bd (See Step 3)
5
Set up the DIP SW as per the original Nu 1.1 Game Bd. If you are operating just 1 cabinet without any
communication then please set up machine as the “main machine” (1P). If however you are operating a
number of cabinets (1 to 4) with communication, then set the DIP SW to the corresponding cabinet position.
(See DIP SW settings below.
6
Reassemble and reconnect the Nu 1.1 Game Bd by following in reverse order procedures 2 to 8 in section
16-2 of this manual.
Nu 1.1
848-0002D
Key Chip
Key Chip
Tab
DIP SW
ON OFF
DIP SW Settings
Cabinet 1 (1P) / Cabinet ID:1
Cabinet 2 (2P) / Cabinet ID:2
Cabinet 3 (3P) / Cabinet ID:3
Cabinet 4 (4P) / Cabinet ID:4
1 2 3 4 5 6 7 8
ON OFF OFF ON ON ON ON OFF
1 2 3 4 5 6 7 8
OFF ON OFF ON ON ON ON OFF
1 2 3 4 5 6 7 8
OFF OFF ON ON ON ON ON OFF
1 2 3 4 5 6 7 8
OFF ON ON ON ON ON ON OFF