Sega KO DRIVE, Руководство пользователя, Страница: 95 / 158

86
CONTROL
UNIT
10
Replacing the Volume
1
Switch off the unit.
2
Remove the two screws and lift off the potentio cover
.
10-3-1 FIG. 0
1
3
Detach the connector from the volume to be replaced.
4
Remove the single screw that secures the potentiobase. (see 10-31 FIG. 02).
5
Without detaching the volume, remove the potentiobase. (see 10-31 FIG. 03).
6
Remove the base and gear from the volume, and replace it.
7
After replacement, configure the volume as described above in “Adjusting Procedure”
8
When you have finished, check that the values change smoothly in response to pedal input.
TRUSS SCREW (2), chrome
M4x8
POTENTIO COVER
POTENTIOBASE