Sega GRID Racing DELUXE, Руководство пользователя

Страница: 92 / 146

LAMPS
AND LIGHTING
13
87
13-3 RACELEADER LED - BILLBOARD
THIS WORK ON TOP OF THE CABINET, SHOULD NOT BE UNDERTAKEN WITHOUT THE
USE OF A SUITABLE STEP OR FOOTSTOOL.
MAKE SURE THAT THE MAIN SUPPLY VOLTAGE TO THE MACHINE IS SWITCHED OFF
BEFORE ATTEMPTING TO CARRY OUT THIS WORK
The “RACELEADER” L.E.D assy is housed within the Assy Billboard directly beneath the Billboard fluorescent
lighting. The procedure to access the Raceleader LED is the same as that for the “Fluorescent Tubes. (Please see
Chaptet 13-2 FLUORESCENT TUBES - BILLBOARD.
Once accessed, follow these steps for removel.
1
The Raceleader L.E.D is located inside the Billboard directly behind the Billboard Plate, before attempting
to change the l.e.d, TURN THE POWER OFF.
2
To gain access to the Raceleader l.e.d, extract the (6) fixing screws which hold the Billboard Plate in place
and remove. (Please see 13-2 step 1).
3
Remove the RACELEADER L.E.D by unscrewing the (4) No 4x3/4” Self Tapping Screws and removing the
standoff’s placed behind. Disconnect the LED BD from the harness and remove. Replace the LED strip of
one of the same type. Refit by following the instructions in reverse.
Raceleader L.E.D
No 4 x 3/4” Self Tap Screw
Standoff 11.11mm