Sega GRID Racing DELUXE Скачать руководство пользователя страница 100

Страница: 100 / 146

PERIODIC INSPECTION

Cleaning the Cabinet Surfaces

When the cabinet surfaces are badly soiled, remove stains with a soft cloth dipped in water or diluted (with water)

chemical detergent and squeezed dry. To avoid damaging surface finish, do not use such solvents as thinner, benzine,

etc. other than ethyl alcohol, or abrasives, bleaching agent and chemical dustcloth.

Some general-purpose household, kitchen and furniture cleaning products may contain strong solvents that degrade

plastic components, coatings, and print. Before using any cleaning product, read the product's cautionary notes

carefully and test the product first on a small area that is not highly visible.

Seat (Greasing to Seat Rail Portion)

Move the Seat to the rear most position and apply spray greasing to the portion shown at the right once every 3

months using a BEARING GREASE.

After greasing, move the Seat a few times forward and backward so as to allow the grease to be applied all over

uniformly.

Be sure to wipe grease which attaches to the surfaces of the PROTECT RUBBER on the Seat Rail, or any excess

grease.

Содержание GRID Racing DELUXE



















































































































































Результаты поиска

Содержание GRID Racing DELUXE

Отзывы:

Бренды по названию

Популярные бренды

Sega GRID Racing DELUXE, Руководство пользователя

Результаты поиска

Содержание GRID Racing DELUXE

Отзывы:

Бренды по названию

Популярные бренды