Sega Dinosaur King, Руководство пользователя

Страница: 79 / 121

− − − −
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
− − − −
● Remove and clean smears using a soft cloth dipped in water or diluted chemical
detergent and then wrung dry.
● Never apply machine oil, etc. to the coin selector.
● After cleaning the coin selector, properly insert a standard coin to ensure that
the selector functions correctly.
STOP
IMPORTANT
CLEANING THE COIN SELECTOR
The coin selector should be cleaned once every
3 months. When cleaning, follow the procedures
below:
① Turn off the main AC unit power switch and
open the coin chute door.
② O pen the gate and remove dust using a soft
brush (made of wool, etc.).
③ Remove and clean smears by using a soft cloth
dipped in water or diluted chemical detergent
and then wrung dry.
④ Remove the cradle. When detaching the
retaining ring (E ring), be e x tra careful not to
bend the rotational a x is.
⑤ U se a soft cloth to wipe any dirt/debris off the
rotational a x is and bearings.
⑥ After wiping as described in the previous step,
use a dry cloth, etc. to dry the coin selector
completely.
O nce every month, when performing the Coin Switch Test, check the following points:
□ Does the Coin Meter count properly?
□ Do coins drop into the Cashbo x correctly?
□ Are coins rejected when inserted while holding down the Reject Button?
CRADLE
GATE
FIG.15b
FIG.15c
COIN INSERTION TEST