Sega Dinosaur King, Руководство пользователя

Страница: 60 / 121

− − − − − − − −
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
CLEAR NETWORK SETTING
YES（CLEAR）
->NO（CANCEL）
SELECT WITH SERVICE BUTTON
AND PRESS TEST BUTTON
NETWORK TEST
VERSION *.**
STATUS GOOD
CHECKING **% ←
Only displayed during the test.
ETHER MODE
CHECKING NETWORK
REMOTE DISABLE
LOOPBACK - GOOD ←
Loopback
GATEWAY -- N/A ←
Gateway server
SERVER --- N/A ←
External server
-- COMPLETED --
PRESS TEST BUTTON TO EXIT
(B5) P R I MARY DNS
A setting required for communication, the primary DNS setting.
After inputting the numbers move the cursor to � SET � and press the TEST Button to store the
setting.
(B6) SEC O NDARY DNS
A setting required for communication, the secondary DNS setting.
After inputting the numbers move the cursor to � SET � and press the TEST Button to store the
setting.
(B7) C U RRENT ************, *. *. *. *
The current setting for the selected category.
(C) C L EAR NETW O RK SETT I NG
Return all communication settings to the defaults and selected to not use communication.
(A) NETW O RK TY P E will change to � N O NE. �
To clear settings, use the SERVICE Button to move the cursor to YES (CLEAR) and then press
the TEST Button.
When the settings have been cleared, the message “WRITING DONE” will be blinked.
Press the TEST Button again to return to the Network Setting screen.
Move the cursor to NO (CANCEL) and press the TEST Button to return to the Network Setting
screen without clearing the settings.
(D) NETWORK TEST
This mode allows a communication connection test to be performed.