Seg Malaga, Руководство по эксплуатации

Страница: 40 / 105

11
EN
Connecting external devices (continued)
CONNECTIONS
Name Function Description
AC POWER IN Connect to power supply
HDMI
Connect to the HDMI socket of your
DVD or Satellite Box
VGA
Connect to the PC VGA output to dis-
play PC graphics
PC-IN PC audio input
YPbPr
Connect to the YPbPr output on exter-
nal devices
Video
Connect to the video output of exter-
nal devices
(AUDIO) L/R IN Audio signal input for AV(Shared with
YPbPr)
SCART
Connect to the scant input / output of
external devices
RF Connect to antenna or cable source
Headphone Connect Headphone
USB (DVB-S)
Connect to USB device for multimedia
and PVR
Caution:
Before connecting external devices:
• Makes sure to disconnect the appliances from the
power supply in order to avoid any potential damage
from occurring.
• Make sure to establish the required connection.
• Make sure that the connectors are properly and cor-
rectly attached before connecting the appliances to the
power supply.
PC connection
As PCs are sometimes still supplied with a ‘conventional’
CRT monitor, you may need to adjust the display set-
tings of your PCs graphics card, otherwise the pictures
may not appear correctly. Switch on your PC (still with
your original monitor connected) now select the screen
resolution, and select 60Hz refresh rate. Switch off your
PC, then connect it to your TV while both appliances are
still switched off.
VGA, HDMI PC Connection
Use a PC-VGA cable (not supplied) to connect the TV to
your PC. You can also use an HDMI cable to connect to
your PC (if your PC Graphic card supports HDMI). When
the HDMI cable is used, the PC audio cable is no longer
required. If you use the HDMI to DVI cable, you will need
to use the PC audio cable. Connect all cables carefully
and do not bend or break the connector pins.
When using the VGA cable
• Switch on the TV
• Switch on the PC
• Select PC/VGA as input source
When using the HDMI cable
• Select HDMI as input source
VGA cable
HDMI to DVI cable
Audio cable
HDMI to HDMI
(All illustrated cables are not supplied)
LNB IN
LNB OUT
LNB IN is the connection for the LNB
o
n your satellite dish .
LNB OUT (LOOP OUT) this can be used
for the connection of a second digital
Receiver. Before you activate this
connection the LCD TV must be
switched off.
Malaga
55cm
21.6-inch LCD-TV