English-79
gaming.
•
Use a LAN connection for quicker file
sharing between other devices like
computers.
•
The frequency and channel differ depending
on the area.
•
The transmission speed differs
depending on the distance and number
of obstructions between the transmission
products, the configuration of these
products, the radio wave conditions,
the line traffic and the products that you
use. The transmission may also be cut
off or may get disconnected depending
on the radio wave conditions, DECT
phones or any other WiFi 11b appliances.
The standard values of the transmission
speed are the theoretical maximum
values for the wireless standards. They are
not the actual speeds of data transmission.
•
The location where the transmission is most
effective differs depending on the usage
environment.
•
The Wireless LAN adaptor (not
supplied) should be connected directly
to the TV’s USB port. USB hubs are not
supported.
•
The Wireless LAN adaptor (not supplied)
supports 802.11 a,b,g & n type modems. It
is highly recommended that you should
use the IEEE 802.11n communication
protocol in order to avoid any possible
problems while watching videos.
•
Use the other USB input, if you experience
problems with audio/video performance.
•
You must change your modem’s SSID
when there are any other modems around
with the same SSID. You can encounter
connection problems otherwise. Use
a wired connection if you experience
problems with a wireless connection.
Configuring Wireless
Device Settings
To enable Wi-Fi features, plug in the Wi-Fi
dongle (not supplied) to one of the USB
ports. Open the
Network Settings
menu and
select
Network Type
as
Wireless Device
to
start connection process.
Press the
Yellow
button to scan the wireless
networks. A list of available networks will be
displayed. Please select your desired network
from the list.
NOTE:
If the modem supports N
mode, you should set N mode settings.
If the selected network is protected with a
password, please enter the correct key by
using the virtual keyboard. You can use this
keyboard via the navigation buttons and the
OK
button on the remote control.
Wait until the IP address is shown on the
screen.
This means that the connection is now
established. To disconnect from a wireless
network, highlight Network Type and press
OK.
You can navigate between menu tabs by
pressing left/right buttons. The help bar
on the bottom of the dialog shows features
that you may use. Press the Blue button to
check your internet connection speed. Press
the Green button to switch to advanced
mode and then press the OK button to
edit settings.
Other Information
Configuration Status:
Displays Wi-Fi
status as
Connected
or
Not
Connected
.
IP Address:
Displays the current IP address.
Network Name:
Connected networks’
name will be displayed.
