10
Remote control transmitter
Button description
1)
On/Off
Press to switch on/off the system.
2)
Mute
Press to suspend the sound output temporally.
Press again to resume the sound output.
3)
Memory
In FM mode, press and hold to preset the radio
station. Or press to recall the preset station.
4)
Skip down
In USB mode : to select previous track
In FM mode: tuning the radio station
5)
Rec
Press to encode the aux/phono to USB in MP3 format
6)
Function
Press to select different function mode
7)
Play mode
Press to active repeat /random function for
USB playback
8)
Play/pause
Press once to start USB playback. Press once again to
pause play temporarily
9)
Skip up
In USB mode : to select next track
In FM mode: tuning the radio station
10) TS
In encoding mode : press to active track separation function
11) Stop
In encoding mode : press to stop the recording function
BATTERY REPLACEMENT
The battery compartment is located on the back of the remote control.
1.
Remove the battery compartment door by pressing in on the tab and lifting it off.
2.
Insert two AAA size batteries (excluded) into the battery compartment following the polarity markings inside
the battery compartment.
3.
Replace the battery compartment door.
Battery Precautions
Replacement of batteries must be done by an adult.
The supply terminals are not to be short-circuited.
Non-rechargeable batteries are not to be recharged.
Exhausted batteries are to be removed.
Only batteries of the equivalent type are to be used.
Batteries are to be inserted with the correct polarity.
Dispose of batteries properly. Do not dispose of batteries in
fire. The batteries may explode or leak.
