GPS location: “vibration ,Alarm: Date time
：
”12-10-31 20:08:18
http://maps.\google.com/maps?q=N22.577169,E113.916790.”
LBS location: “vibration ,Alarm: Date time
：
12-10-31 20:08:18
http://maps.\google.com/maps?q=N22.577169,E113.916754.“
During vibration alarm time, if the device is located, but fail to connect to the
platform, the device will send longitude and latitude information. E.g.
“Vibration alarm: N23.111748, E114.409215, 11
While if the GPS is neither located nor connect to the platform, the device can not get
the position information. Then it will send SMS “vibration alarm! Attention” to SOS
numbers.
Note:
1. The device will only alarm once in 5mins.
2. If device can not send SMS normally, please check whether there is enough
balance in the SIM card.
4.5 Geo-fence
You can set a special area as geo-fence field. When the car or person gets in/out of
this area, the device will send alarm to SOS numbers when the geo-fence function is
ON.
4.5.1 Activate geo-fence function
Geo-fence function is off as default. You can activate it by SMS command.
There are two kinds of Geo-fences, circular and rectangle.
(1) Circular fence
Set a coordinate as the centre of the circular fence, and then set a distance as radius.
Go in/out fence SMS:
“
FENCE,ON,0,latitude,longitude,radius#
”
e.g.
FENCE,ON,0,N22.57139,E113.87710,5#
It means the radius is 500 meters
（
radius 1=100M
，
2=200M····and so on
）
The device will reply “OK” if set successfully. As long as the device goes in or out of
this circular area, it will send alarm to the SOS numbers.
