Send SMS command:
mode,1#
4.11.2 Model2: Locating according to vibration mode (default)
In this mode, the terminal will turn on GPS as default.
If GPS locates, the terminal will send first GPS location to the platform. If GPS could
not locate, it will upload LBS location.
In this mode, if the terminal does not detect any vibration, GPS will be off. And after
it detects vibration, it will start working again.
Send SMS command:
mode,2#
4.11.3 Mode3: Locating according to command
In this mode, the terminal will be in Deep Sleep mode. It will not connect with the
platform. You can send SMS command/call to activate checking location function.
During this mode, arm/disarm will not be executed. It will reply: “The terminal is in
Deep Sleep mode. Please wake up!”
Send SMS command:
mode,3#
5 Appendix
Battery security
● Please use the original battery. The warranty will be invalid by using any other
accessory. The manufacturer will not take any responsibility for any damage caused
by not using the original battery.
● The new battery can realize the optimal performance after fully- charging for 2 or 3
times.
● The battery can be used for hundreds of times, yet it will wear out eventually.
When its talking time and standby time shrinks sharply, you need a new one.
● Cut off power supply when not using the charger. Don’t charge the battery for more
than one week, since over charging will reduce its using time.
● Do not short-circuit the battery with metal stuff (such as the key in your pocket)
● Do not bend or open the battery.
● Do not put the battery into water or fire.
● The battery should never be charged at temperature below 0 degrees or above
45 degrees Celsius.
6. Trouble shooting
If there is any problem while operating the terminal, please refer to the following
