Seepex BCSO 025-24 to 130-6L Скачать руководство пользователя страница 15

Страница: 15 / 60

Ausgabe
issue

D / 27.08.2012

Dokument
document

OM.TRA.01e

Blatt
sheet

1 (2)

Transport, Intermediate storage, Disposal

4.1

Safety

4.2

Transport

4.2.1 Dimensions, weights and center of gravity

Note the dimensional drawing (

→

chapter 5.6).

4.2.2 Symbols

•

Meaning of symbol

4.2.3 Sling points (AP) for lifting devices

4.2.4 Unpacking the machine

Comply with the symbols and notices on the packaging.

Remove the screwed connection between the machine and packaging.

Remove the machine with a lifting machine/industrial truck.

4.3

Temporary storage/Corrosion protection

•

All seepex machines have corrosion protection applied as standard prior to transport.

CAUTION

Damage to property/injuries due to incorrect transport

Slight injury or damage to property can occur

Comply with the safety notes and transport notes on the packaging.

Use suitable means of transport, lifting devices and tools.

Use protective equipment.

Top

Fragile

item

Against moisture

protect

Centre of gravity

Lashing points

WARNING

Warning of suspended load.

Death of serious injury can occur.

Use the lashing points

(AP)

for lifting divices.

Note the centre of gravity (

→

dimensional drawing, chapter 5.6).

Lifting machine

Industrial trucks

Содержание BCSO 025-24 to 130-6L





























































Результаты поиска

Содержание BCSO 025-24 to 130-6L

Отзывы:

Похожие инструкции для BCSO 025-24 to 130-6L

Бренды по названию

Популярные бренды

Seepex BCSO 025-24 to 130-6L, Руководство по эксплуатации и сборке

Результаты поиска

Содержание BCSO 025-24 to 130-6L

Отзывы:

Похожие инструкции для BCSO 025-24 to 130-6L

Бренды по названию

Популярные бренды