SEELEY INTERNATIONAL
- SERVICE GUIDE
|
15
CONTROLLER OR SYSTEM
RESET
Note!
Resetting the whole system will mean
that every component connected to the
wall control will be given the factory default
address. After resetting a whole system it
will be necessary to go through the ‘System
Installation Wizard’ again from the start.
ILL1596-B
ILL1632-A
It is possible to reset the whole system
(including all connected components) or the
controller only.
Use a pin or paperclip to press and hold
the reset button located at the back of the
controller.
This will cause the following screens to appear:
Some settings are protected by an access
code to prevent customers changing important
parameters
The access code is 7378.
ILL2126-A
