Seeley Breezair TBQ, Руководство пользователя

Страница: 5 / 12

BREEZAIR TBQ/TBS OWNER’S MANUAL
|
3
OPERATING YOUR COOLER
To provide efficient cooling or ventilation
the building must have sufficient exhaust
openings to the outside of the building.
To assist air flow, open windows and doors that
are farthest from the outlet vent in each room.
In these rooms, provide an exhaust opening
about 2 times the vent size of the room.
Where the design of the building prevents
adequate exhaust, consideration should
be given to the provision of mechanical
extractions, such as an exhaust fan.
There are three main ways that an evaporative
cooler can operate to provide cooling comfort.
The cooler can be set at a constant fan speed,
without reference to the current temperature.
• The cooler can be given a temperature
target, in which case it will vary the fan
speed in order to get as close to the
target as possible. (Note! Humid weather
conditions may limit what temperatures
can be achieved.)
• The cooler can be set to a fan only mode,
providing air circulation only.
Hello and congratulations
on purchasing a Breezair
evaporative cooler for your
home.
At Seeley International we manufacture
Breezair evaporative coolers from the highest
quality materials, and we have designed the
product to provide many years of economical,
trouble-free cooling.
MAGIQTOUCH CONTROLLER SETTINGS
MENU
Your MagIQtouch Controller contains
a settings menu which gives you access
to information about your Breezair evaporative
cooler and to extra functions including:
ABOUT APPLIANCE
Access information about the appliances
installed in your system.
MIN/MAX SET TEMPERATURE
You can change the minimum and maximum
temperature displayed on your slider,
depending on what temperature range
you prefer your system to work within.
NIGHT QUIET MODE
Restrict fan speed over the night time period
for a quiet night’s sleep.
MANUAL DRAIN
This will turn the cooler off and drain the tank.
PAD FLUSH
This will turn the cooler off and run the pumps
for a specified time. Use this feature to flush
the cooler pads or in the event of a bushfire.
DRAIN AND DRY
This option allows you to nominate a time each
day when the cooler will drain the tank and run
the fan for 1 hour.
AUTOCLEAN
Select the preferred cleaning interval (50 / 100
/ 200 hrs). At 8.00am after the selected running
hours has been reached, the cooler will drain
the tank, fill with fresh water and operate the
pump for 5 minutes. When complete, drains
the tank and returns to previous operation
mode.
Note! There are some settings that are just for
trained service agents or installers. You won’t
be able to access any of these options without
a pin code.