SeeEyes SC-IPR3001E, Руководство пользователя

Страница: 6 / 16

Release Version 1.8
5
3-2. SC-IPR3001E (Receiver)
① NVR SIDE:
Port to connect NVR or PoE Hub
② DC 48~56V IN: Port to input DC adapter (48V or 56V) power
③ TRANSMITTER SIDE: Port to connect Transmitter and input video
④ LED Indicator
Name Color Status Description
PWR Red
On Power On / Pairing completed
Flashing Power output / Under pairing / Coaxial cable not connected
Off Power Off
ETH Green
Flashing Ethernet connected in normal
Off Ethernet not connected
LINK Green
On Connected to Transmitter
Off Not connected to Transmitter
PoC Red
On PoC power On
Flashing Over consumption for Coaxial cable
Off PoC power Off
※ When turning the product on, the LED turns on sequentially first and the product is operated.
⑤ FUNC Button:
Function to pair and operate Transmitter and Receiver each other
<How to Use FUNC Button>
※ In case of first installation or replacement of Transmitter or Receiver, use this button for
communication between Transmitter and Receiver
※ Press FUNC button on the Receiver about 3 seconds (The PWR LED blinks)
※ Wait about 1 minute until the Transmitter and Receiver is connected.
※ After the LED’s LINK is On, the connection between Transmitter and Receiver is completed.
★ In case of initial input, the product retries by own until the pairing is completed even though
the connection is failed.
★ Press the pairing(FUNC) button again if necessary depending on the environment.
④
④
①
③
②
⑤