SeeEyes SC-IPR3001E, Руководство пользователя

Страница: 11 / 16

Release Version 1.8
10
9. Trouble Shooting
Symptom Checking Method
There is
no power input.
<Transmitter>
• Check if PoC LED on Receiver and PWR LED on Transmitter is ON.
• Check the connection status of coaxial cable.
<Receiver>
• Check if the PWR LED is working properly.
• Check the input status of power adapter or PoE Hub.
• Check if the exclusive adapter (DC 48V/1A) is used.
The video
is not displayed.
• Please check if LINK LED is On and ETH LED is flashing. If LED is
Off, press FUNC button on Receiver about 3 seconds. After that,
Check again if PWR LED is flashing and pairing is working
properly.
• Check if the transmission distance is within the recommended
value or not.
• Check if the Network Cable arrangement is correct.
• In case of using PoE function on Transmitter, check if the PoE LED
is On. If LED is Off, set the PoE switch as ON.
Power supply
by PoE
does not work.
• Check the PoE switch status on Transmitter.
• Check if PoE LED on Transmitter is On.
• Check if the Network Cable arrangement is correct.
• Check if the IP CAMERA has PoE function.
NETWORK
connection
does not work.
• Check if the Network Cable arrangement is correct.
• Check if there is Walkie-Talkie or any device which has strong
waves near the product.
• Check if the Network configuration is designed properly.
The video status
is abnormal.
• Check the connection status of coaxial and Network cable.
• Check if the NVR is compatible with camera.
• Check the performance status of camera.