Release Version 1.1
8
6. Power Output
(Calculated Value)
Cable Transmission
Distance (CAT.5e)
Transmission
Bandwidth
With
DC48V 1A Adapter
With
DC56V 1.16A Adapter
Cable Loop
Resistance
100m
100Mbps
30W
30W
18.2Ω
200m
100Mbps
17.2W
30W
36.2Ω
300m
100Mbps
11.4W
22W
54.7Ω
400m
100Mbps
8.6W
16.6W
72.9Ω
500m
100Mbps
6.86W
13.3W
90.8Ω
600m
10Mbps
5.8W
11.2W
111.1Ω
700m
10Mbps
4.9W
9.6W
128.7Ω
800m
10Mbps
4.2W
8.3W
147.4Ω
※ The transmission distance may vary depending on the specification of camera and NVR.
※ In case of using PoE function of the Transmitter, the transmission distance may vary depending on
the type of camera.
Especially, use exclusive adapter for cameras with high power consumption such as IP PTZ
cameras and the cameras with many IR LEDs.
※ When transmitting cable distance of 500m or more, the camera input voltage may low.
Therefore, use DC56V adapter connected to the receiver.
7. Installation Precautions
※ Use exclusive power adapter separately for each product. It is not recommended to use single
adapter for supplying power to several products.
※ It is not recommended to place products in close or tie each other.
※ It is not recommended to connect adapter to DC jack when supplying power to the Receiver by
PoE.
※ When installing the product by supplying power by PoE, it is recommended to check the video
first and ground the camera.
※ When using a surge protector, the cable distance between camera and Receiver is recommended
to be within 50M.
※ Use of LAN cable extension gender (coupler) may cause signal attenuation. It is not recommended
to use multiple extended gender connections.
