SeeEyes SC-16MHD, Руководство пользователя

Страница: 14 / 28

Release Version 1.2
13
4-2-2. ALARM
▶ Enter [Device] → [Alarm] to show the following screen.
4-2-2-1. Alarm-In
- Select alarm names and types in this menu.
- Click the keyboard icon in the ‘Alarm-in’ menu to show the keyboard and enter the name.
- Available to set specific channels for Alarm input. Select(

) the relevant channels in the ‘Use’ items
shown right left to each alarm name. If you do not use any specific channel’s ‘Alarm In’ function,
please do not mark(
□ ) there.
- Click ‘All’ to change every alarm type at once.
∙ NO(Normally Open): The contact sensor is open (Factory default setting).
∙ NC(Normally Closed): The contact sensor is closed.
- Available to set up the event when generating an alarm by the menus at the right bottom.
∙ Beep: Buzzer out when an alarm is generated.
∙ Message: An alarm message pops up and stay on the screen for around 30 seconds when an
alarm is generated.
∙ Popup: The relevant channel’s video pops up and stay on the screen for 5, 10, 30 seconds or
keep being shown on the screen in Full Screen mode, when an alarm is generated.