Seeed SENSECAP, Руководство пользователя

Страница: 21 / 51

User Guide (Tech Document)
© 2008 -2019 Seeed Technology Co., Ltd. All rights reserved. www.seeed.cc
21 / 51
2)
To install on the wall or other surfaces, you can use self-drilling screws to fasten the bracket onto the
surface.
3.3.3 Installing Sensor Nodes
After installing brackets, let’s install sensors.
1)
The Sensor Probe should be placed vertically downward with the label facing outward. Be consistent
with the bracket gap. Make sure the circle part in the middle of Sensor Node is aligned with the middle
of the bracket, and then press the Sensor Node to fit into the bracket. A click/snap sound indicates that
the Sensor Node has been installed successfully. Try to manually twist it to make sure the Sensor
Node is locked to the bracket securely.
2)
Secure by fastening the bracket cap as instructed in the image.
3)
Place two self-drilling screws on the bracket to increase firmness and help prevent theft.