Arch GPRS V2 vs Arch GPRS
Parameter
Arch GPRS V2
Arch GPRS
MCU LPC11U27
LPC11U24
GSM/GPRS Module
SIM900
EG-10
MicroSD Card
Yes
No
Hardware Overview
Страница 1: ...ar network Arch GPRS V2 has a standard Arduino interface as well as Grove connectors on board It is convenient to connect existing Shields and Grove products to Arch GPRS V2 You can even connect a solar panel directly to the board to allow the battery to charge from it A low power design guarantees easy charging and long hour operations when outdoors Note Arch GPRS V2 does not come with an mbed in...
Страница 2: ...Arch GPRS V2 vs Arch GPRS Parameter Arch GPRS V2 Arch GPRS MCU LPC11U27 LPC11U24 GSM GPRS Module SIM900 EG 10 MicroSD Card Yes No Hardware Overview ...
Страница 3: ...d binary file to CRP DISABLD Quick press the reset button to run the new binary 5 Verify that your code is running successfully by looking at the Arch GPRS V2 board If the right most LED from the Pinout shown above is blinking and the other 3 LEDs next to it are all ON this implies that your code is working You can change the code to the following and see what happens 1 2 3 4 5 6 7 8 9 10 11 12 13...
Страница 4: ...nted mount the disk at mnt_dir 2 dd if new_firmware bin of mnt_dir firmware bin conv notrunc On mac you ll need to use Terminal to run the following script to copy you re bin file to your Arch 1 dd if new_firmare bin of Volumes CRP DISABLD firmware bin conv notrunc If you are so inclined you can also create an Automator application to support drag and drop of the file to your board Just create a R...