Seeed Technology Co., Ltd ReSpeaker Core v2 User Guid
Now follow step 2 above to connect to your Respeaker over this serial connection. And note this is a one
time procedure as you'll next setup your Respeaker for Wi-Fi connectivity and then connect via ssh or
VNC going forward.
Netw ork Setting Up
A.Wi-Fi Setting Up
Configure your ReSpeaker's network with the Network Manager tool, nmtui. nmtui will already be installed on the
ReSpeaker image.
Select your Wi-Fi for ReSpeaker v2.0， and type your Wi-Fi password and press Enter Key again.
When you see a “*” mark, it means that your ReSpeaker has successfully connected to your Wi-Fi network.
Now find the IP address of your ReSpeaker by using the command below.
