Planting Seeds
Planting Clones
•
After flipping slab, use cutter to cut square flaps
next to marks in slab’s plastic cover according
to number of seeds to be planted (maximum of 5).
•
Make small holes (0.5-1 cm/ 0.2-0.4 in. depth)
in the slab.
•
Plant seeds in holes.
•
Cover each seed with the remaining
slab material.
•
Use sprouting cups to cover each seed.
•
After flipping slab, place clone on slab and
use marker to draw a square around clone.
•
Move the plant away and at the marked
square cut through the plastic and also layer
of slab underneath it.
•
Remove cut slab layer.
•
Place clone in hole and fill empty space with
part of slab you removed in previous step.
Now… Let it grow!
!
Recommendation:
Use gloves for this process.