3.4 Fertilizing solutions -
bottles A (green) and B (orange)
3.5 Rockwool slab
Leave space on left
•
Connect one end of water hose to tap
and other to water inlet (FILL) at rear of Seedo.
•
Ensure hose is fully inserted.
•
Open service door, remove water container cap.
Use a funnel and slowly fill the container.
•
4 Gallons (15 liters) of water are needed for initial
watering process. You will need more later on.
Press door opening button,
hold for 15 seconds until it blinks
pale blue.
Define Seedo name (5-10 alphanumeric
characters and symbols).
Specify which option you selected in step 4
and check that both connections are secure.
•
Connect drainage outlet (DRAIN) at rear of Seedo
to home drainage.
•
Connect drainage outlet at rear of Seedo to external
container with capacity of 4 gallons (15 liters) at least.
•
Insert hose fully into container but above fluid level.
Water supply – automatic
Water supply – manual
Drainage – automatic
Drainage – manual
•
Press Wi-Fi settings button to open
Settings menu.
•
Turn on Wi-Fi and from Wi-Fi Settings
menu, choose
UAG XXXX
iOS device:
Type
uagpassword and return to app.
Android device:
Approve password
uagpassword.
4. Connect Water Supply
and Drainage
5. Connect Seedo to App
6. Connect Seedo
to Your Home WiFi
7. Naming Seedo
8. Choosing Water Source
and Drainage Method
•
Open bottle lid.
•
Insert suction hose into bottle.
•
Insert bottle into its slot
with label facing outwards.
•
Lift latch to secure.
•
Place slab in tray at bottom of Seedo’s
interior with markings facing downwards.
•
Align slab to the right side, away from
water drain mesh on left.
Choose either automatic or manual option
for connection to water supply and drainage.