Sedgwick TA315, Инструкция по эксплуатации и техническому обслуживанию, Страница: 4 / 36

TA Operation/Maintenance Instructions Page 4 of 36
Introduction
This Instruction Manual is designed for you in accordance with The Supply of Machinery
(Safety) Regulations 1992, and the Supply of Machinery (Safety) (Amended) Regulations
1994, which implement the European Machinery Directive 89/392/EEC.
It describes how to operate the machine properly and safely. Be sure to follow the safety
instructions provided as well as any local accident prevention regulations and general
safety regulations. Before beginning any work on the machine, ensure that the manual, in
particular the chapter entitled "Safety" and the respective safety guidelines, has been
read in its entirety and fully understood. This manual is an integral part of the machine and
must therefore be always kept accessible. If the machine is sold, rented, lent, or otherwise
transferred to another party, a copy of the manual must accompany it.
All those appointed to work on or with the machine must have fully read and understood
the manual before commencing any work. This requirement must be met even if the
appointed person is familiar with the operation of such a machine or a similar one or has
been trained by the manufacturer.
1.0 Design and Purpose
The Sedgwick Tilting Arbor Sawbench is a hand fed circular ripsaw designed to re-saw
timber and other analogous materials. These operations include Deep Ripping, Angle
Ripping, Bevelling, Cross Cutting, Mitring, Compound Angling, and Panel Cutting.
Any use outside of the machine's intended purpose shall be considered
improper and is therefore not permitted. All claims regarding damage
resulting from improper use that are made against the manufacturer and its
authorised representatives shall be rejected. The operator shall be solely liable
for any damage that results from improper use of the machine.
It is expressly forbidden to make any unauthorised modifications to the machine.