Sedgwick SM210, Инструкция по эксплуатации и обслуживанию

Страница: 8 / 29

SM210 Operation/Maintenance Instructions Page 8 of 29
the base if it is. This will keep the machine from rocking and generating vibration during the
cut.
2.2 SM210 Foundation Drawing
650mm centres
780mm
Remove the protective rust preventative using turpentine or paraffin. Do not use any solvent,
petrol, or gas oil, which might dull the paint or oxidise the paintwork. Lightly oil cleaned
surfaces to prevent rusting.
2.2 Storage
Keep the machine sealed in its original packaging until required for assembly/installation and
be sure to observe the machine handling advice on the outside of the packaging.
Store under the following conditions:
• Store indoors in a dry and dust -free environment.
• Do not expose to toxic substances or direct sunlight.
• Store in ambient temperatures and ensure environment is not damp; avoid exposure to
condensation.
• If stor ing for a period of several weeks, apply a coat of oil to all machine parts that might
rust before storing and check condition before operating for the first time after being in long-
term storage.
2.3 Disposal
If disposing of the machine, separate all components into piles of the same material e.g.,
steel, to recycle. The main structure is made of cast iron and steel and can therefore be
safely dismantled and recycled. Always comply with local environmental regulations when
disposing of machinery.
Be aware of your environmental obligations. Carefully consider the disposal of
any electrical components e.g., motors, starters, and ensure any lubricants etc.
are treated as hazardous waste and disposed of safely in accordance with
environmental laws
.
50
0m
m
38
0m
m
ce
nt
re
s