Sedgwick SM210, Инструкция по эксплуатации и обслуживанию

Страница: 4 / 29

SM210 Operation/Maintenance Instructions Page 4 of 29
Introduction
This Instruction Manual is designed for you in accordance with current UK regulations and EU
law, in particular the European Machinery Directive 206/42/EC.
It describes how to operate the machine properly and safely. Be sure to read carefully and
follow the safety instructions provided as well as any local accident prevention regulations
and general safety regulations. Before beginning any work on the machine, ensure that this
manual, in particular the chapter entitled "Safety" and the respective safety guidelines, has
been read in its entirety and fully understood. This manual is an integral part of the machine
and must always be kept accessible. If the machine is sold, rented, lent or otherwise
transferred to another party, a copy of the manual must accompany it.
All those appointed to work on or with the machine must have fully read and understood the
manual before commencing any work. This requirement must be met even if the appointed
person is familiar with the operation of such a machine or a similar one or has been trained
by the manufacturer. The manufacturer cannot be held liable for damages resulting from a
failure to follow the instructions set out in this manual. Should you have any questions
regarding this manual, please contact the manufacturer.
1.0 Design and Purpose
The Sedgwick SM210 Spindle Moulder is a hand fed machine designed to profile wood and
other analogous materials. Such operations may include:
1. Straight Moulding e.g., rebating, bevelling, and grooving.
2. Circular Moulding ( optional Ring Fence and Cage Guard required ).
3. End Grain Work e.g., Tenoning and Finger Jointing ( optional Sliding Table required ).
The machine is not designed for any other purposes except as set out above. The
operator of the machine shall be solely liable for any damage that results from
improper use of the machine.
The machine should not be modified in any way without the written consent of the
manufacturer. Please also refer to Section 11.0 regarding use of unauthorised spare parts.