SED GPH-610R
User Manual
- 62 -
Support Serving Cell: BCCH, RxLev, RxQual,
BSIC, CI, Timeslot, MCC, MNC, LAC
Neighbor Cells : BCCH, RxLev, BSIC etc..
Cell Forcing (Optional)
You can force the mobile to camp on a target
cell in idle or dedicated mode, it will force
handover in dedicate mode. An icon will be
prompted in status bar. Select
Cell Forcing
and press OK to enter the setting screen. You
can enter ARFCN and BSIC of target cell in this
menu. Press OK to enable the forcing mode.
Note:
If the forcing ARFCN is not a BCCH
ARFCN, your handset will lose service. In
Dedicate mode, the forcing ARFCN shall be
one of the six strongest neighbor cells that
BSICs have been decoded. The success of
handover finally depends on the network.
Cell Lock (Optional)
You can use this function to lock the current
serving cell, it will deactivate cell reselection
and handover. An icon will be prompted in
status bar. You can also select
Cell Lock
and
press OK key to switch between forcing mode
and non-forcing mode.
Note:
The priority of
Cell forcing
is higher than
Cell lock
.
Cell lock
and
Cell forcing
cannot
be used simultaneously.
Location
ON/OFF:
Turn on / Turn off the Location.
1) Mode
: you can choose one of three,
High
accuracy, Battery saving, Device only
. the
default value is
High accuracy
2) GPS information
:This is a GPS
information.
3) Use assisted GPS
: enabled and disabled
Use assisted GPS.
4) A-GPS Roaming
:enabled and disabled
A-GPS Roaming.
