background image

CAMERA: 

 
1.  The color CMOS camera is maintenance-free, waterproof (IP-68) and vibration resistant. 
2.  This camera is designed to work well in day time or night time conditions.  
3.  The camera is completely electronic.  There are NO manual adjustments for focus, etc. 

 

 
DISCLAIMER

Under  no  circumstances  shall  the  manufacturer  or  distributor  of  the  Securview™  be  held  liable  for 
consequential  or  incidental  damages  sustained  in  connection  with  the  use  of  the  Securview™  Rear 
Vision System.  The Securview™ is designed as a safety enhancement device and is in no way intended 
as a replacement for rear-view mirrors, side-view mirrors or physically checking the surroundings when 
backing  a  vehicle.    Always  check  surroundings  for  safety  when  backing!    Objects  on  the  monitor  are 
closer  than  they  appear.    For  the  best  fit,  modification  of  the  vehicle  license  may  or  may  not  be 
necessary.    It  is  the  sole  responsibility  of  the  vehicle  owner  to  check  and  verify  any  and  all  State  or 
Federal Motor vehicle codes with regards to modifications of vehicle license plates.  The manufacturer of 
the  Securview™  assumes  no  liability  or  responsibility  whatsoever  with  regards  modifications  of  the 
license plate. 
 
 
 

 

 

www.crimestopper.com 
[email protected] 
Phone (800) 998-6880 
FAX (805) 581-9500 
 
© 2013 Crimestopper Security Products 

 

 
 
 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 
 
 
 
 
 

 

1-14-2013 

Содержание SV-6818.EM.II

Страница 1: ... larger blind spots FEATURES The 170 ultra wide angle CMOS color camera provides rear images in real time and eliminates the dangerous blind spot directly behind your vehicle when backing up Installs like a flush mount camera but gives the lip mount appearance Normal and reverse image selectable Parking lines to help the driver accurately judge distance behind the vehicle Constructed of high grade...

Страница 2: ...o seal the hole once you route the wiring through to prevent leaking or moisture damage NOTE Make sure to use the supplied hole saw bit to drill the hole for the insert This will help you to avoid any mistakes in drilling the hole too big or too small Camera Lens Mounting Clip Cable Mounting Surface Double Side Tape Use the Provided Hole Saw Bit to Drill the Hole for the Camera REVERSE MIRROR IMAG...

Страница 3: ... of the harness is for reverse imaging Keep the wire connected for normal image or cut the wire in half for reverse image The Blue loop wire is for the Parking line option Cut this wire to remove the parking lines or leave it connected to activate the parking line feature 4 Run the Yellow RCA video cable to the monitor s video input or reverse camera input MONITOR BLUE WIRE Parking Line Option Con...

Страница 4: ... intended as a replacement for rear view mirrors side view mirrors or physically checking the surroundings when backing a vehicle Always check surroundings for safety when backing Objects on the monitor are closer than they appear For the best fit modification of the vehicle license may or may not be necessary It is the sole responsibility of the vehicle owner to check and verify any and all State...

Отзывы: