INSTALLATION
MOUNTING:
1. The Securview™ SV-6703 Rear Vision System uses a wide-angle lens for best all around
performance. The Camera will display the full width of most parking spaces up to 7 feet or
even wider.
2. The SV-6703 is design to be flush mounted on vehicle’s surface. It can be mounted anywhere
on the vehicle that has a flat surface. Double check behind the surface of where you will be
mounting the camera to make sure that there is adequate space for the camera to be placed
in the decided location.
3. Use the provided Hole Saw bit to drill the hole in the location you have chosen for mounting
the camera.
WARNING
: When drilling the hole, be careful not to use excessive force when pushing on the
drill as the bit may break through the surface quickly and puncture anything
behind it resulting in damage to any modules or OEM parts behind the mounting
location.
4. Once the hole has been drilled, route the RCA and Power cables through the hole and snap
the camera into place. The steel lock tabs will hold the camera tight to the mounting surface.
SIDE VIEW
Mounting Clip
CAMERA INSTALLATION
Use the Provided Hole Saw
Bit to Drill the Hole for the Camera
Camera
Lens
Cable
Mounting
Surface
CAMERA:
1. The color CMOS camera is maintenance-free, waterproof (IP-68) and vibration resistant.
2. This camera is designed to work well in day time or night time conditions.
3. The camera is completely electronic. There are NO manual adjustments for focus, etc.
